PAVER SERVICES · MELBOURNE & BREVARD COUNTY, FL
Stone for every
square foot.
Driveways, pool decks, patios and walkways — designed, rendered and installed by one licensed Melbourne crew across Brevard County. Every project starts with a free photo estimate so you see the finish before you spend a dollar.
01
Paver Driveway Installation
Full driveway transformations — demo to grade, compacted base, and a paver system with borders and patterns that make the whole front of the property read different from the street.
Most Melbourne driveway replacements start with a failed concrete slab: we demo it, haul it off, and build a compacted limerock base before the first paver goes down. A 1,600–2,000 sq ft driveway typically runs three to five working days including borders, cuts, polymeric joint sand and cleanup.
DRIVEWAYS DETAILS- Complete demolition and re-grading — we never lay over a bad base
- Concrete, clay and 3-piece paver systems in running bond, herringbone and more
- Contrasting soldier-course borders and apron treatments
- Sealed, polymeric-jointed finish that shrugs off Florida storms and oil stains
02
Pool Decks & Cage Paver Flooring
The surface around your pool is where your backyard actually gets lived on. We install cool-touch, barefoot-friendly paver pool decks — inside the cage, around the spa, and everywhere between.
Pool deck work starts at the cage track and the door sill: deck level, slope and drainage are set before a single paver is laid, so water sheets away from the lanai instead of pooling at the slider. Travertine and light-blend concrete stay walkable at midday, even in July.
POOL DECKS DETAILS- Pavers inside lanais and screen enclosures — new build or remodel
- Heat-reflective travertine and light blends that stay walkable at noon
- Drainage, deck level and cage-track considerations handled up front
- Coping and step tie-ins that make the pool edge look finished
03
Paver Patios & Outdoor Living
Patios, pergola pads, fire-pit circles and outdoor-kitchen footprints — designed around how you actually use the yard, then laid to outlast the house.
We build patios from roughly 300 sq ft garden pads up to 1,200 sq ft outdoor-living footprints with fire features, kitchen pads and seat walls. The layout is marked and walked through with you before excavation, so the finished space is the one you pictured.
PATIOS DETAILS- Free layout consult — we design the space before quoting it
- French pattern, basketweave and random-interlock layouts
- Fire features, kitchen pads and seat walls planned into the base
- Lighting sleeves and sleeves roughed in during install
04
Walkways, Entries & Steps
Front entries, side-yard paths and garden walks — the connective tissue of the property. Small job, huge curb-appeal-per-dollar ratio.
Entry walks and side-yard paths are usually a one- to two-day install. Curved borders are cut on site, and wherever a new walk ties into an existing driveway we match the paver color and pattern so the seam disappears.
WALKWAYS DETAILS- Front-entry walks that tie the driveway to the door
- Curved or straight layouts with border accents
- Paver steps, landings and riser treatments
- Match-to-existing color and pattern service
How every Titan install runs
01
Free written estimate
We measure the area, check the base and drainage, and price the whole job in writing — in person or from photos you send.
02
Layout & material selection
Patterns, borders, colors and levels are chosen with you before excavation, including HOA and ARB paperwork where required.
03
Base prep & install
Demo, haul-off, compacted base, edge restraint, then pavers laid and cut on site by our own crew.
04
Joint sand, cleanup & guarantee
Polymeric joint sand, full cleanup, a walkthrough with you, and a written workmanship guarantee.
Common questions
How much does paver installation cost in Melbourne, FL?
Most residential paver driveways in Brevard County run roughly $12–$20 per square foot installed, depending on base condition, paver type and site access. Patios, walkways and pool decks usually land in a similar range. Every Titan estimate is free, written and itemized, and it covers base prep — not just the stone.
Do you offer free estimates in Melbourne and Brevard County?
Yes. Estimates are free and written, either on site or from photos you send us. We measure the area, inspect the existing base and drainage, and give you a fixed price before any work begins.
How long does a paver driveway installation take?
A typical 1,600–2,000 sq ft driveway takes three to five working days from demolition to joint sand, weather permitting. Patios and walkways usually take one to three days, and pool decks depend on cage and coping work.
Not sure which surface you need?
Upload a photo of your property — the AI visualizer shows every option laid.